• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Distributor clocking the wires

Distributor clocking the wires

Posted By Richard 2 Years Ago

You don't have permission to rate!

Post Reply

Distributor clocking the wires

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
Richard	Posted 2 Years Ago
Supercharged Group: Forum Members Last Active: Today @ 2:19:37 AM Posts: 395, Visits: 80.5K	I’m running a vintage Mallory dizzy that bumps the head at TDC so it cannot be advanced any further. Can I just move the wires one position to get more dizzy adjustment.  If so which direction clockwise or counterclockwise should I move the wires. Thank you, Richard
	Reply Quote

Threaded View

Threaded View

Distributor clocking the wires By Richard ( 2 Years Ago ) Absolutely. Most of the time, depending on what is being hit, you only... By DryLakesRacer ( 2 Years Ago ) I didn’t want to remove distributor figuring clocking the wires do the... By Richard ( 2 Years Ago ) Moving the wires in the same direction you are trying to turn it will... By Robs36Ford ( 2 Years Ago ) I have a late 50s Mallory I plan to install before long, and this... By DANIEL TINDER ( 2 Years Ago ) Dan, It this protrusion (red flush red bolt) that gets in the way.... By Richard ( 2 Years Ago ) Dan, It this protrusion (red flush red bolt) that gets in the way.... By Richard ( 2 Years Ago ) Sorry photo won’t load. It’s behind the condenser By Richard ( 2 Years Ago ) I’m having trouble load photos here too…I get a please wait…. By DryLakesRacer ( 2 Years Ago ) Not you. Known issue with the site. Images cannot be processed. Been... By Robs36Ford ( 2 Years Ago ) If it's the Mallory with the two piece cap, it may be easier to move... By paul2748 ( 2 Years Ago ) I had to do that on a "SCRUB" engine I used to have where the... By Deyomatic ( 2 Years Ago )

Post Reply

Back To Top

Reading This Topic