Where to get gasket for spin on filter adapter?

Author	Message
Tedlauri	Posted 2 Years Ago
Supercharged Group: Forum Members Last Active: 2 Months Ago Posts: 40, Visits: 11.3K	!956 272 in pickup 1956 F100 272 4 speed Northern California
	Reply Quote
Replies
cos	Posted 2 Years Ago
Supercharged Group: Forum Members Last Active: Yesterday Posts: 187, Visits: 119.4K	Make one out of heavy gasket material sheet.
	Reply Quote
Tedlauri	Posted 2 Years Ago
Supercharged Group: Forum Members Last Active: 2 Months Ago Posts: 40, Visits: 11.3K	Thanks guys, anyone know what the torque should be on that adapter? 1956 F100 272 4 speed Northern California
	Reply Quote
Ted	Posted 2 Years Ago
Co-Administrator Group: Administrators Last Active: 3 days ago Posts: 7.5K, Visits: 205.8K	Tedlauri (8/10/2023) Thanks guys, anyone know what the torque should be on that adapter? The nut holding the adapter in place bottoms out. I’m guessing 100 lb/ft torque would be adequate but in taking some of those off of blocks, you would think they were much tighter than that. Just make sure that the adapter plate hole in the center is at least 1/16” higher than the outside/bottom surface when the plate is sitting on a flat surface. Lorena, Texas (South of Waco)
	Reply Quote
Tedlauri	Posted 2 Years Ago
Supercharged Group: Forum Members Last Active: 2 Months Ago Posts: 40, Visits: 11.3K	Thanks 1956 F100 272 4 speed Northern California
	Reply Quote

Threaded View