|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.2K,
Visits: 7.8K
|
Thankyou Ted.
Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.
|
|
Group: Administrators
Last Active: 11 hours ago
Posts: 7.4K,
Visits: 205.8K
|
100-105 lbs of seat pressure will prove to be more than adequate. I end up removing the inner springs (not the dampers) on quite a few of the stock applications in which to get the seat and over the nose pressures within a more reasonable limit.
  Lorena, Texas (South of Waco)
|
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.2K,
Visits: 7.8K
|
This came up a year or more ago. On a Isky E-4 260 degree .425 lift (with 1.54 rockers), they recommend dual damper 135 lb seat 285 open pressures. Some of you guys said that was too much. I agree, but what would be some minimum pressures on a motor with this cam and 1.43 rockers? Peak rpm 4700.
Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.
|