Profile Picture

SuperCharged 312 Distributor Curve Spec

Posted By 58F600 Last Year
You don't have permission to rate!

SuperCharged 312 Distributor Curve Spec

Author
Message
58F600
Posted Last Year
View Quick Profile
Supercharged

Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)Supercharged (268 reputation)

Group: Forum Members
Last Active: Last Month
Posts: 94, Visits: 421
Anyone know the mechanical advance vs RPM curve, advance vs Vacuum specs and base and total timing for the factory SuperCharged 312? Getting ready to build a base tune for our 292 Turbo and just need a starting point to work from.

Threaded View

Threaded View
Forum Post SuperCharged 312 Distributor Curve Spec By 58F600 ( Last Year )
Forum Post What heads & cam are you using for the turbo application? Just... By 55blacktie ( Last Year )
Forum Post Stock 62-64 C1TE Don't copy us. This is going to see as little boost... By 58F600 ( Last Year )
Forum Post I thought it was an unusual combination, particularly for an F600, but... By 55blacktie ( Last Year )
Forum Post “My wife wanted her dump truck to make turbo noises.” That may be the... By MplsMike ( Last Year )
Forum Post Back to your original post, the following comes from the factory... By Hoosier Hurricane ( Last Year )
Forum Post Thanks John! Am I reading that correctly, they only ran 15° total... By 58F600 ( Last Year )
Forum Post I’m not arguing with the F code spec, but this was my experience.... By miker ( Last Year )
Forum Post The specs show 27 degrees total mechanical advance, there would not... By Hoosier Hurricane ( Last Year )
Forum Post [quote][b]Hoosier Hurricane (8/18/2024)[/b][hr] The specs show 27... By 58F600 ( Last Year )
Forum Post [quote][b]miker (8/18/2024)[/b][hr] I’m not arguing with the F... By 58F600 ( Last Year )
Forum Post My experience is diesels also, mostly on Cummins, measured right off... By miker ( Last Year )
Forum Post 1000° continuous sounds reasonable. 1250° for short pulls maybe. The... By 58F600 ( Last Year )
Forum Post Depending on your static compression ratio, you may not need to pull... By Joe-JDC ( Last Year )
Forum Post Thanks Joe. I'm assuming this engine is a simple stock rebuild... By 58F600 ( Last Year )
Forum Post It's apples to oranges but I had a problem with knocking at 10 PSI on... By Deyomatic ( Last Year )
Forum Post Big difference between 5 psi and 10 psi when it comes to timing... By Joe-JDC ( Last Year )
Forum Post Pictures posted in the street section By 58F600 ( Last Year )


Reading This Topic

Site Meter