|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 306.2K
|
Did anyone find out if JOHN MUMMERT offers the O/S adj. screws? C2AZ 6549-A - .0023 O/S Several years ago, FORD TRACTOR was offering them.
____________________________
|
|
Group: Forum Members
Last Active: 15 hours ago
Posts: 1.7K,
Visits: 152.6K
|
6 VOLTS/POS. GRD. NW INDIANA
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 306.2K
|
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 306.2K
|
See if this link works - https://www.youtube.com/watch?v=Q7ZjObWyRJUIt shows a correct rebuild. Also - https://www.youtube.com/watch?v=mRaiMciNbDA
____________________________
|
|
Group: Forum Members
Last Active: 15 hours ago
Posts: 1.7K,
Visits: 152.6K
|
I have friction screws AND locknuts (belt & suspenders). Also, the hex screws are then easier to adjust more precisely when using a P&G gapper tool (unless you have 3 hands 😁).
6 VOLTS/POS. GRD. NW INDIANA
|
|
Group: Forum Members
Last Active: Last Month
Posts: 1.2K,
Visits: 1.8K
|
John Mummert, ford-y-block.com. He doesn't have online ordering; you'll have to call. The best time to call is between 3:45 and 5, PST.
|
|
Group: Forum Members
Last Active: Today @ 3:32:31 AM
Posts: 156,
Visits: 11.6K
|
Kultulz, Where are new rocker arm adjusters available from? I have been looking for new ones without any success. Either style would be OK, however I would prefer the lock nut style if I could get them. Thanks for any information!
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 306.2K
|
JUST FYI O/S ADJUSTERS are available. I would prefer the locking nut style on a HP engine myself personally. http://yblockguy.com/techtips/rocker_arm_assy.htm
____________________________
|
|
Group: Forum Members
Last Active: Last Month
Posts: 128,
Visits: 11.6K
|
Rocker arms unlimited. Did run into a problem initially. The adjuster screws were defective. Kept backing off so changed to NOS jam nuts which did fix the problem.
|
|
Group: Forum Members
Last Active: Yesterday
Posts: 1.7K,
Visits: 306.2K
|
The rebuild depends on the quality of parts, machining and assembly - http://forums.y-blocksforever.com/Topic167745.aspx
____________________________
|