• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• 1957 Tbird intake manifold

1957 Tbird intake manifold

Posted By RossL Last Month

You don't have permission to rate!

Post Reply

1957 Tbird intake manifold

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
RossL	Posted Last Month
Supercharged Group: Forum Members Last Active: Last Month Posts: 65, Visits: 7.1K	Is ECZ 9425B the correct intake for a 1957 Thunderbird?   I want to use this on my 1955 TBird 292 engine with a more modern carb
	Reply Quote

Threaded View

Threaded View

1957 Tbird intake manifold By RossL ( Last Month ) Yes. By Hoosier Hurricane ( Last Month ) I think you're going to need to get a '57 and up distributor, also,... By Deyomatic ( Last Month ) Yes - and later carb will require a later (57 and up) distributor. By paul2748 ( Last Month ) Stuff you wanted to know about the ECZ-B manifold but were afraid to... By Ted ( Last Month ) Just a note - The 4V INTAKE MANIFOLD for the 1957/64 272/292 TRUCK... By KULTULZ ( Last Month ) [quote][b]Ted (8/10/2025)[/b][hr] The stock throttle bore size... By RossL ( Last Month ) "Would you be able to modify my manifold? My 292 is stock, are there... By KULTULZ ( Last Month ) The '57 distributor will operate on a 6 volt system. The distributor... By Hoosier Hurricane ( Last Month ) [quote][b]KULTULZ (8/13/2025)[/b][hr] "Would you be able to modify... By RossL ( Last Month ) "The '57 distributor will operate on a 6 volt system. The distributor... By KULTULZ ( Last Month ) "The car is 12 volts. I already have a 57 distributor and ECZ B... By KULTULZ ( Last Month ) The points are not voltage specific. Use the '57 points in the '57... By Hoosier Hurricane ( Last Month ) Have you done this? How about the condenser? OEM 6V isn't going to... By KULTULZ ( Last Month ) I’ve converted my ‘54 239” to the ‘57 and up distributor, must be... By pintoplumber ( Last Month ) "I’ve converted my ‘54 239” to the ‘57 and up distributor, must be... By KULTULZ ( Last Month ) [quote][b]KULTULZ (8/13/2025)[/b][hr] "I’ve converted my ‘54 239”... By pintoplumber ( Last Month ) THANX AGAIN (also Daniel Tinder & Hoosier) for edumecating me. If no... By KULTULZ ( Last Month ) [quote][b]RossL (8/12/2025)[/b][hr] Would you be able to modify my... By Ted ( Last Month ) [quote][b]Ted (8/16/2025)[/b][hr] [quote][b]RossL... By RossL ( Last Month ) Keep the slots straight at the divider. Joe-JDC By Joe-JDC ( Last Month ) The ‘55 heads will have smaller intake ports. You may suffer some... By DANIEL TINDER ( Last Month ) ... hmmph ... This brings up another little factoid I have been... By KULTULZ ( Last Month ) I seem to recall Dan Jessup realizing a performance gain when using... By 55blacktie ( Last Month ) Kultulz...seems like you'd have to get maybe a 1" thick spacer with... By Deyomatic ( Last Month ) "Kultulz...seems like you'd have to get maybe a 1" thick spacer with... By KULTULZ ( Last Month ) While the intake is off is the time to mess with it, obviously. I... By Deyomatic ( Last Month ) If its was me ... :Whistling: ... I would try and find the correct... By KULTULZ ( Last Month ) [quote][b]KULTULZ (8/13/2025)[/b][hr] If its was me ...... By 55blacktie ( Last Month ) When I shipped my intake manifold to Ted, I shipped it by UPS Flat... By 55blacktie ( Last Month ) If you don't have a machinist that you trust locally I would... By Deyomatic ( Last Month ) ... AMEN ... By KULTULZ ( Last Month )

Post Reply

Back To Top

Reading This Topic