cam help again

Posted By 62galxe 16 Years Ago

You don't have permission to rate!

Author	Message
62galxe	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: Last Year Posts: 145, Visits: 2.1K	63 f100 292 .060 overbore G heads standard trans lookin at a isky rpm-300 or mummerts 270 grind. Have read that the isky E4 is pretty mild. lookin for comments on these grinds. lookin for a cam that will still have some low end power. RPM-300/duration 270/lift .448/112 centerline mummert 270/duration 272/lift .440/centerline 108 Kenny Onalaska, Texas
	Reply Quote

Threaded View

cam help again By 62galxe ( 16 Years Ago )

Afraid I’ve got the Isky E4 in my 272 so can’t help you on the other... By Ted ( 16 Years Ago )

Ted; viewed all the cams listed for Y-blk by Isky. Why do they... By PF Arcand ( 16 Years Ago )

[quote][b]PF Arcand (2/24/2009)[/b][hr]Ted; viewed all the cams listed... By Ted ( 16 Years Ago )

Everybody seems to be running the Isky or Mummert cams,I've got a... By kidcourier ( 16 Years Ago )

[quote][b]kidcourier (2/24/2009)[/b][hr]I've got a 272 y-block that... By Ted ( 16 Years Ago )

thanks for the help on the original topic. By 62galxe ( 16 Years Ago )

how does lobe centerline affect idle and low end power. say 112... By 62galxe ( 16 Years Ago )

[quote][b]62galxe (2/27/2009)[/b][hr]how does lobe centerline affect... By Ted ( 16 Years Ago )

wonder if i should repost a new topic since most of the replys have... By 62galxe ( 16 Years Ago )

Kenny, I think you have to try it out, A lot of it is personal... By bird55 ( 16 Years Ago )

Ok, I just reread you original post. Since you have standard trans... By bird55 ( 16 Years Ago )

You might give Engle a call too, they can grind about anything on any... By pegleg ( 16 Years Ago )