CAM LIFT

Posted By Ol Ford Guy 16 Years Ago

You don't have permission to rate!

Author	Message
Ol Ford Guy	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: 3 Years Ago Posts: 323, Visits: 2.4K	I see some cam specs listing lift at 448, 512 etc. When the lift is listed at say 295, do you just multiply by the rocker arm ratio of 1.54 to get the total lift of 454.3? Thanks, Paul J. - '57 E Code
	Reply Quote

Threaded View

CAM LIFT By Ol Ford Guy ( 16 Years Ago )

Pretty much correct unless your rocker ratio is 1:43 Oldmics By Oldmics ( 16 Years Ago )

[quote][b]Ol Ford Guy (3/8/2009)[/b][hr]I see some cam specs listing... By Ted ( 16 Years Ago )

Paul, It's fairly simple to measure the cam, should you... By pegleg ( 16 Years Ago )

Here are links to the articles that were originally published in... By Ted ( 16 Years Ago )

Can one simply put 1:54 rockers on and gain anything? By ejstith ( 16 Years Ago )

Increasing the rocker ratio will typically give more seat of the... By Ted ( 16 Years Ago )

ejstith, In a nutshell, yes. But don't expect a hundred HP.... By pegleg ( 16 Years Ago )

Thanks .. By ejstith ( 16 Years Ago )