I am just about done with a passenger car fender panel repair (lower end toward the rocker panel and door, where most of these rust out). The panel I bought was from Mac's. It was decent, of a good gauge, and all, but I did not like the formed, raised lip (the edge towards the tire that is about 1 - 2" wide). This is the part of the fender that has a definitive crease in it. The crease from Mac's panel, not so defnitive. I have worked it out ok,,,but is there another company (I know Mac's get these from somewhere) that has a better panel, short of me buying an NOs panel?

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com