Profile Picture

living with gremlins

Posted By Jim Rowe 16 Years Ago
You don't have permission to rate!
Author
Message
Jim Rowe
Posted 16 Years Ago
View Quick Profile
Supercharged

Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)Supercharged (286 reputation)

Group: Forum Members
Last Active: 8 Years Ago
Posts: 215, Visits: 1.3K
Three times today my car would not shut off with the key.

With the engine running I pulled the battery ground..car kept running. They I pulled the battery positive.. car kept running.



Now I have been running a 12V GM alternator for the last year and once in a great while this would happen. i would reach under the dash and wiggle the wiring loom from the switch and I could get the car to shut off. Well not now.



The car is not using the wiring loom from the regulator to the alternator. I took it off. I have a one wire alt. and the wire from the alt. goes direct to the solenoid. Again I did not have this problem but twice last year. I have removed the bulb from the gen light gauge as it would stay red while driving. I did this last year. Also the old voltage regulator is still wired into the loom. I only disconnected the generator portion as it was no loner needed.



I know there is a solution without going to a new wiring harness. I couldn't find the old thread I read a couple years ago about this problem.



Please help. As you must have already come to the conclusion, as I have that the alt is back feeding the ignition but where?



Jim

http://www.y-blocksforever.com/forums/Uploads/Images/685636be-87f4-437e-933a-adcb.jpg  Jim Rowe Elkhorn, NE
http://forums.y-blocksforever.com/uploads/images/f2b2f69a-dc78-4e8b-b3aa-1890.jpg



Reading This Topic


Site Meter