Tim, I have got to bore this thing out a little more and get a bigger cam (of course, multiplying my carb by 3 wouldn't hurt either). I had forgotten the sound of that youtube motor - makes mine sound like she's starving for air!!!

NICE!

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

It was me and it's still on there. 

http://www.youtube.com/watch?v=nwyTHxB25o8&feature=channel_page

   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias

We sure had a ball!

I actually got some of this idea from watching you fire up that 3 deuce in your garage - wasn't that on youtube a year or two ago? or was that somebody else? We've always had car shows, why not an engine show? The most ironic thing is that I did not do very much to this engine beyond cleanup. Most folks following this thread have already viewed the footage of this Y running in the parts car. I just pulled it, cleaned it, did some minor adjustments, and ran it. I could not believe that this thing does not smoke at all.

The former owner had the crankcase tube plugged - found that out pretty quickly. I opened it up out of curiosity. It did drip a little (from the inside of the tube) - but that pcv deal can easily fixed with the right valley pan setup. I like what I did to my father-in-law's car.

Keep up the good work out there on the left coast.

Jessup

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

Very neat stuff Daniel!  I just love the golf cart.  All I do with my "run-in stand" is get the attention of a few nieghbors, I think it would be fun to take it around to car shows.  Keep it up!

   God Bless.   Tim                           http://yblockguy.com/

350ci Y-Block FED "Elwood", 301ci Y-Block Unibody LSR "Jake", 312ci Y-Block '58 F-100, 338ci Y-Block powered Model A Tudor

tim@yblockguy.com  Visalia, California    Just west of the Sequoias

How could anyone be critical of such a great project? Did they think the engine should be in their car (or garage). I just can't imagine what they could have found to pick on. Unless the "experts" were there to comment on fuel line routing, engine color etc.. Next meet take a scrub engine and see what they think! Or even a 55-56 Ford 6cyl on a stand. I think they will really freak when you show up with the blower in place!!

By the way the outlet tube on the McCullouch can be "clocked" to move it to a more open or easier to route location. Just keep the dip stick pretty close to vertical. You should be able to solve the clearance problem that way. Do you have a picture of the bracket you are using? Chuck in NH

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Sorry to get your name wrong, Kevin. I met so many people that first afternoon in the flurry of activity when we showed up. I may have gotten you confused with Fred Wilson...

You are right about the expertise of the members. Some of them have probably forgotten enough to write several books, not to mention what they still remember and are able to do in the here and now. Watching Mike work on Bob's 56 "ranchero" as he calls it was truly a sight.

Glad to hear you made it home fine and hope you are able to get some things squared away. I know that when I put the valley pan w/ pcv setup on my father-in-law's rebuilt 292 that it has had no issues about the oil. Not as many miles as yours yet though.

thanks again,

Dan

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

Daniel, no it's Kevin Kennedy. You did a demo for my Wife and I just before the Tech Session.

I wound up skiping the session, it was to crowded and I have been to them before.

We are most likely some of the youngest members of the CVA, I have been a member since I was 40 (13 years ago)

You are right, some of them are very picky but they are a sight to see when a sick Y rolls into the parking lot. Before you know it 5 or 6 CVA members are hanging over the fenders and fixing it. It's a great sight to see 240 years of Y experiance working on a problem.

Keep up the good work on promoting the Y as a engine with potential.

As to my oil burning problem, on the way to the CVA I burned 1 qt in 350 miles. On the way home with the PCV system disabled I burned none. My PCV system was a PCV valve in a rubber gromet placed in the road draft tube. In 10000 miles it never gave be any trouble why it is sucking oil now I do not know.

I have a valley pan with a rear opening, just have not gotten around to installing it yet, will do it soon and put the PCV valve back there.

I was thinking the worst all the way home, did I lose a piston pin clip and was a piston pin cutting a grove into the cylinder wall. That is the condition I found before the rebuild, A .40 over bore and 1 sleeve later it was back on the road and has run fine for the last 10000 miles.

Going to do some maintenance sunday, as I write this the oil is draining and I have pulled an oil sample to have tested. In the morning I am going to pull the plugs and see how they are burning then do a valve adjustment since it has not had one since it's first 2000 miles. Not expecting to find any problems but it will give me some piece of mind.

In closing, it as a great week and I was sorry to see it end. Keep spreading the word on the Y

Kevin

Kevin (Wilson, right?),

Good to hear from you - got back home tonight -- how did that tech session end up?

----------------------------------------------------------------------------------------

For the few of you that have been following these posts, we had a ball at the annual CVA show. We accomplished our purpose - to shake things up! Everything from "Wow, man cool!" to "You should have painted the oil filter black" to a few choice cuss words of disapproval to "Can you rebuild my Y for me?" Who ever thought a Y block could be so divisive?

Little did most people know that this engine was pulled from a parts car, has mismatched heads, mismatched rockers, mismatched dizzy/carb (the condenser went out on me on the loadamatic before I had the chance to replace it, but I did have that later dizzy to put on - hooked it to manifold vacuum and plugged the carb's vacuum advance port. Funny, most people could not tell the difference, but I did crank it with the advance un plugged, and then plugged it back in when I was horsing around with it.)

You can see a short video of my father-in-law revving it up a bit if you hit this link...

http://s673.photobucket.com/albums/vv91/danman55/?action=view&current=100_1827.flv

The drops of oil on that pan are coming out of the inside of the pcv tube on the side of the block. Unfortunately this engine got very, very little run time before I brought it out, so I really did not go over it with a fine tooth comb. NO LEAKS except for that pesky tube. I did put a couple of gaskets on the engine when I was painting/cleaning (mostly just degreaser, cordless drill/wire wheel), but nothing major. The vacuum on this motor is very strong, and you can see that there is virtually no smoke out the exhaust, even when choked a little.

The radiator stayed sealed up just fine and she took a long time to heat up, but she never ran hot.

The biggest impression made was when we first arrived and were literally swarmed with people. Somebody in the crowd said, "Does she run?"

I said, "Watch this" (started praying like crazy) and turned the key. Vroooooommmm! She fired right up. Some guys from New Jersey (didn't get their names, but were good fellas) just stood there for 20 minutes or more just watching it idle ! Others of course were there to ask a whole host of questions, but the end result...many came away with a renewed vision to keep a Y block in their car. Unfortunately the rain on Friday was absolutely horrible, but our few hours on Thursday afternoon/evening made an impact - it was very positive.

The CVA has some really great guys. Here is a photo of me and Bob Haas, the club historian in his 1954 golf cart - yep, he made that,,,,,has a cut down 54 dash and everything.

The CVA also has some guys that didn't appreciate my presence - I am younger than most, attracted a lot of attention, and did something today that I guess a few would never consider doing. You gotta love it when people start griping about this or that on your setup right in front of your swap space (that you paid money for). I told one fella, "hey, here's a can of spray paint, next time, go to town and do it yourself." And all of that happened with a bunch of Ford folks....

Wait until I hit real world in local car show or a swap meet!

Special thanks to Bob Haas, Kevin Kennedy and Fred Wilson (for their support and encouragement), my father-in-law (who worked his rear end off to help me), Luke Shope, Wayne Haines, Mike Hicks, and Don Jessup, my dad who introduced me to Y blocks!

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com

Daniel

It was good seeing you at the CVA this morning, Thanks for the demo you gave my wife and I of the Y on the test stand. Nice job.

Going to hate to leave Saturday morning.

My 312 has 10000 miles since rebuild and in the last 600 has started buning oil at a rate of a quart in 350 miles, prior to that it burned none in 1500 miles. I have disabled the PCV and hope that is where it was going, will update when we get home to Long Island.

Kevin

good news - the banner has arrived at the hotel so that I can pick it up when I get there. I sure hope it looks good. I will be sure to a few photos of the setup.

My buddy's trailer will hold the backdrop while I position 2 US flags at the forefront. Y block - center stage.

The EZC fired up on command today at about 11:30 am - always feels like giving birth to a baby Unfortunately, my radiator (that never leaked previously) had a large hole in one of the cores. I never use JB weld, but in a pinch it was there - just short on time. She held water well this evening, so I will wait until tomorrow to fire her up again and do the real "pressure" test. The 2 barrel works ok, but I did put on a later style distributor plumbed into the intake manifold vacuum. The blower mount and blower clears with very LITTLE room to spare. I never thought about it before, but this was obviously made for a Tbird, because the clearance at the rear of the blower would never be an issue with a Tbird style water pump/timing cover combo that puts the blower bracket forward...

Leaving out tomorrow morning.

Daniel Jessup

Lancaster, California

aka "The Hot Rod Reverend"
check out the 1955 Ford Fairlane build at www.hotrodreverend.com