Here's a few of my '62 Galaxie

 

 

 

"  If my calculations are correct, when this baby hits eighty-eight miles per hour ... you're gonna see some serious sh*t. "

Dr Emmett Brown, 1985

I'll bite, where did this injector intake come from. It's not a Hilborn!

Frank/Rebop

Bristol, In ( by Elkhart) 

Jim is working on the profiles problem.  He mentioned that this will take awhile though but he is making headway towards getting them all visible again.  If you originally had a profile or sent one in and don’t see it coming back to life within the next 2-3 weeks, just email another to Jim another so it can be reposted.

Lorena, Texas (South of Waco)

(center) Frank! its enderle, i,ve been thinking about this for a while now and as most of us are coming down the home stretch, i thought i,d like people to see what great y block engine parts were around before they are scattered to the 4 winds and never seen again. I have been involved in these for over 40 yrs and have an interesting collection, so if no one minds i will post pics now and then for all to share. Of things i dont have are the Bud valve covers, horne intake and algon injection which are so scarce! Ted, i have been struggling to get writing to stay in one paragraph but the pics seem to split it up, so am trying the IF Code shortcuts?  These are the early and late WEIAND Covers. Best regards to all. aussiebill. (/center)

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

The top set were made by the Mag Wheel Center in Sydney during the late 60,s on, by coincedence i had put my 56 customline into them to have radiused rear wheel archs done like a Buick at the time. The 2nd set are unknown and there were many home grown covers made, as the US was worlds away in those days. Best regards aussiebill.

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

hey bill post as many pictures as you like i love looking at your stuff !

moz. geelong victoria australia.

graduate 1980, bus, truck, car, hot rod, boat, submarine, hovercraft, hydrafoil, firetruck, mobile home, jet, helicopter, cruise ship, motorcycle, bicycle, santa's sleigh, clock, alloy bullbar, alloy fuel tank, lens, dr who's tardis, matter - anti matter warp drive buffer & y-block lover

As long as you have the time, might I share some pics?

Casey Lake - Faribault, Minnesota

The top set were made here in 70.s by drag racer Warren Armour who raced early holdens then rails, they are nice, the lower set are currently made here by Aussiespeed and also come polished. regards aussiebill.

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia

Bill let me double what Moz wrote... post them pictures, they are great to see.., as you wrote most are scattered to the winds.. Not everyone grew up in love with scrubs..

Brother and I own/operate 1957 Ford Fairlane 312/4x2 and two 1963 Falcons 302 rollers carburated 600cfm, FE427 sitting in shed..

Thanks for the kind words, i know we all enjoy sharing our interest and the parts are a lot of it, love to see some other folks engines, parts, cars and interests!!!

I dont know who made these but are unique! regards bill.

  AussieBill            YYYY    Forever Y Block     YYYY

 Down Under, Australia