Machining tolerances for Chevy rods

Posted By LordMrFord 16 Years Ago

You don't have permission to rate!

Author	Message
LordMrFord	Posted 16 Years Ago
Supercharged Group: Forum Members Last Active: 4 Years Ago Posts: 687, Visits: 9.3K	I am putting Chevy 2.100 rods to Y-block and machinist wants to know the tolerance for big end radius. I want also know big end width and small end gap. Thank you. Hyvinkää, FI
	Reply Quote

Threaded View

Machining tolerances for Chevy rods By LordMrFord ( 16 Years Ago )

2.1" +-0.001 or what? By LordMrFord ( 14 Years Ago )

I grind std. chebbie rod throws to 2.099" maybe 2.098" for racing.... By mctim64 ( 14 Years Ago )

If you have a crank offset ground check the bearing to radius... By John Mummert ( 14 Years Ago )

For what its worth, I've got 2 stroker motors with whole assembly's... By miker ( 14 Years Ago )

Yblockpinto312 I sent you a private message. Wondering if you can... By scott5560 ( 14 Years Ago )

[quote][b]yblockpinto312 (2/20/2011)[/b][hr]......I think Ted has used... By Ted ( 14 Years Ago )

Thanks for your answers.

I got set of 6.3" Carrillo K1 rods... By LordMrFord ( 14 Years Ago )

[quote][b]LordMrFord (2/23/2011)[/b][hr][b]My machinist meant big end... By Ted ( 14 Years Ago )