ok guys so i put some j-b weld on the carb were the crack is imma let it drya few hours and take it for a spin and see if it helped

FORD IS LIFE OIL N GAS IS MY BLOOD

I would groove the crack first and then use a high  quality two part epoxy. I have had great results with epoxy for a variety of problems  as im sure you have as well . good luck

hey guys i was cleaning up the motor today and noticed that on the carb on the bottom borner were the holes are there is a crack and i can hear air when i cover the crack it stops i was wondering would a little jb weld fix the problem or would i have to take a it a carb shop and have them fix it

FORD IS LIFE OIL N GAS IS MY BLOOD