Profile Picture

what OD will work with my 292

Posted By cbass139 16 Years Ago
You don't have permission to rate!

what OD will work with my 292

Author
Message
cbass139
Posted 16 Years Ago
View Quick Profile
Supercharged

Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)Supercharged (183 reputation)

Group: Forum Members
Last Active: 12 Years Ago
Posts: 183, Visits: 898
I have a 58 f100 with a 292 in it that I want to put a OD behind.  I love the three on the tree and want to keep it, so I have located three potential OD that might work.  They are a unit out of a 55 f100, one out of a 63 f100, and a t86e-1.  I dont know if any of you have any experience with this but was hoping somebody can point me in the right direction.  I know that the trucks had a larger input shaft then the cars but seeing that these are out of trucks I think I am in the clear on that.  If you need any other info let me know.  Thanks in advance.

1958 F100 292

"Nothing is particularly hard if you divide it into small jobs."

"Chop your own wood, and it will warm you twice."

-Henry Ford

Threaded View

Threaded View
Forum Post what OD will work with my 292 By cbass139 ( 16 Years Ago )
Forum Post The 1955 and 63 units should be similar or the same. Either should... By John Mummert ( 16 Years Ago )
Forum Post NO POWER SHIFTS with the square side cover or tin cover units or you... By DANIEL TINDER ( 16 Years Ago )
Forum Post Thanks so much John. I will try to get the 63 seeing that I have a 12... By cbass139 ( 16 Years Ago )
Forum Post All 3 are probably a version of the T86 and they are tougher than most... By crenwelge ( 16 Years Ago )
Forum Post I expect the two 55's are about the same, probably T-86's. The T-89 is... By ejstith ( 16 Years Ago )
Forum Post not to high-jack this but how do you tell the difference? I just... By bloodyknucklehill ( 16 Years Ago )
Forum Post If you are asking how to determine a T86 or T89, The T86 had a tin... By crenwelge ( 16 Years Ago )
Forum Post so the T-86 was a toploader and the T-89 was a side loader.. good to... By bloodyknucklehill ( 16 Years Ago )
Forum Post Missed out on the 63 and not sure about the 55, still working on it.... By cbass139 ( 16 Years Ago )
Forum Post Stutz will not bolt to your flywheel housing. I'm sure the tail shaft... By crenwelge ( 16 Years Ago )
Forum Post Is it possible to get a car OD and use my existing trans to make it... By cbass139 ( 16 Years Ago )
Forum Post I have a car overdrive transmission in my truck. I took the tranny... By pintoplumber ( 16 Years Ago )
Forum Post Dennis, How hard was it to do that work? Could you guide me through... By cbass139 ( 16 Years Ago )
Forum Post It's not that hard. If I remember, take the side cover off and pull... By pintoplumber ( 16 Years Ago )
Forum Post Not to confuse the issue, but, I have always thought the tin top cover... By John Mummert ( 16 Years Ago )
Forum Post The T85 has quite a few similarities to the T89. It is also is a... By crenwelge ( 16 Years Ago )
Forum Post Does anybody know/recall if the T89 has a synconized 1st gear?? I... By Unibodyguy ( 16 Years Ago )
Forum Post Only second and third got the brass synchros. You had to double... By crenwelge ( 16 Years Ago )
Forum Post Dennis or anybody else, if I get a car OD and do the input shaft swap... By cbass139 ( 16 Years Ago )
Forum Post I don't know if '58 is any different, but my truck yoke with universal... By pintoplumber ( 16 Years Ago )
Forum Post Hi, The T-85 O.D. transmissions are very strong and have a curved... By Nick Brann ( 16 Years Ago )


Reading This Topic

Site Meter