Some of you chimed in on my previous
THREAD about the Y-block that I picked up on craigslist (sight-unseen). It was a roll of the dice, but I figured the odds were with me to get some decent stuff. It finally arrived yesterday at the truck terminal, and I got it home and nestled into its resting place...
Here's the only pictures I had to go buy after I bought it. My buddy took these at his portland terminal after he picked up the engine/trans for me:

Anyway, here's what I ended up with (I refer to it as a '57 due to the carb and distributor, and the heads):
- ECG block... 1957 passenger 272. The cylinders seem as clean as my T-Bird, with no ridge, and the engine spins over very easily
- EDB9430/EDB9431 Manifolds...
- T-stat housing, intake & carb... broken, cracked (junk)
- Good distributor ('57-later)... forgot to get the numbers, but nothing special
- Accesories/brackets...
- Low ration rockers... again, less wear than what was on my T-bird,
- ECZ-G heads... This is what I was really hoping for. Still have "Fomoco" stamped on the intake valves. One valve stuck open, but heads look pretty good.
- T-86 o/d transmission... Spins/shifts freely, R10 o/d unit.
- Clean bell housing, clutch fork, & starter...
Just thought I'd share what I ended up with...
BIGREDTODD
Todd in Central California...about half way between Fresno and Sacramento
1956 Thunderbird - 1960 F-100 - 1961 Starliner - 1961 Imperial