Hitting on all eight cylinders
Group: Forum Members
Last Active: 15 Years Ago
Posts: 8,
Visits: 18
|
Help -- High beams on my 59 Ford quit working -- checked fuses -- checked wiring -- replaced foot switch still no luck, any ideas? 
|
|
Group: Forum Members
Last Active: Last Year
Posts: 512,
Visits: 1.7K
|
Have you checked the sealed beams. I have no explanation for it, but I have seen many times when the high beam burns out on one side, the other one goes too. This was very common before the days of halogen lights and I have seen a lot of people go to a lot of work before checking the easiest first.
Kenneth
Fredricksburg, Texas
|
|
Group: Forum Members
Last Active: Last Year
Posts: 1.3K,
Visits: 9.2K
|
Be sure to check your junction box connections, there bad for doing the same thing, high beam, low beam, turn signals etc.
-Gary Burnette-
|
|
Group: Forum Members
Last Active: Last Month
Posts: 3.7K,
Visits: 32.6K
|
Check for power to the plug at the seal beam using a test light.Low beam has power to one of the 3 prongs.High beam on should have power to both.Power to both would be seal beam burned out I think.
 
|