Hitting on all eight cylinders
Group: Forum Members
Last Active: 13 Years Ago
Posts: 8,
Visits: 49
|
Thanks for the response gentlemen. Gil
|
|
Group: Forum Members
Last Active: 15 Years Ago
Posts: 103,
Visits: 161
|
I used Runtz on my 55 fairlane as well. Great little products! If my memory serves me correctly, I Installed the Runtz on the gauge's inside post, closest to the speedo cable.
A.J.South Jersey SMSgt USAF Retired
1955 Ford Ranch Wagon & a couple of old guitars...Life's Good!
|
|
Group: Moderators
Last Active: 6 hours ago
Posts: 3.7K,
Visits: 322.9K
|
The G and Y may have been color markings for the original wires. I'm pretty sure Y(ellow) goes to the fuel tank. I also think the gauge doesn't care which is hot and which is sender.
John - "The Hoosier Hurricane"
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 13 Years Ago
Posts: 8,
Visits: 49
|
Rewireing my 55 Fairlane with a Rebel Wire kit and I'm not sure which wire goes where on the two posts behind the fuel gauge. One post is labeled "G" and the other looks like a "Y". I have a Runtz reducer to install so I need to know which post is positive and which is sending unit. Any help?
|