|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.2K,
Visits: 7.8K
|
Thankyou Bill. These are the only ECZs I've ever seen.
Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.
|
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 1.8K,
Visits: 11.4K
|
46yblock (4/3/2010)
I have 5 main caps taken from a 312. Lined them up on a table today and noticed one had bolt holes that were at least 1/4 in. shorter than the other 4. Numbers on 4 are ECZ 6329A, and on the oddball ECZ6325A. The short cap came from the rear of block. Dont recall reading that there were 2 styles of 312 caps. Did the '57 312s have the shorter bolts?Short one is rear one to clear rear seal housing lip.
 AussieBill YYYY Forever Y Block YYYY Down Under, Australia
|
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 1.2K,
Visits: 7.8K
|
I have 5 main caps taken from a 312. Lined them up on a table today and noticed one had bolt holes that were at least 1/4 in. shorter than the other 4. Numbers on 4 are ECZ 6329A, and on the oddball ECZ6325A. The short cap came from the rear of block. Dont recall reading that there were 2 styles of 312 caps. Did the '57 312s have the shorter bolts?
Mike, located in the Siskiyou mountains, Southern, OR 292 powered 1946 Ford 1/2 ton, '62 Mercury Meteor, '55 Country Squire (parting out), '64 Falcon, '54 Ford 600 tractor.
|