|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 322,
Visits: 1.2K
|
If you stay with the original choke you will need tube, or you could go with electric choke. Without a choke at all is usually not easy, pumping to start and easy to kill engine till warmed up.
Ol'ford nutCentral Iowa
56 Vic w/292 & 4 spd.
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 5 Years Ago
Posts: 7,
Visits: 399
|
Old Ford nut, Thanks for the quick reply. Very helpful. My intake manifold has a plug where the heat tube should go. Do I need to block off at the carb or drill and tap the plug out to connect? Thanks!
1957ford
|
|
Group: Forum Members
Last Active: 12 Years Ago
Posts: 322,
Visits: 1.2K
|
Port on choke housing is for heat tube to manifold, other by front bowl is for vacuum advance to dist.
Ol'ford nutCentral Iowa
56 Vic w/292 & 4 spd.
|
Hitting on all eight cylinders
Group: Forum Members
Last Active: 5 Years Ago
Posts: 7,
Visits: 399
|
Gents, Just bought a 1273 Holley off of Ebay for my '57 ford Convertible. THere are 2 ports on the passenger side of the carb that I'm not sure where to hook up. 1 port is to the lower left side of dial choke, the 2nd port is larger and near the front bowl. Where do each hook up? Many thanks!
1957ford
|