That's alright Thanks for responding, I figured out I could attach the springs to the bent portion of the throttle instead of using the tear drop piece that came with the kit. Also if I swap my half inch carb spacer with a 1" spacer everything clears. So I'll try this until I run into something new.

sorry to get here late but check here

And scroll waaaaay down to this area and you can see the parts you need. Also if you click on their small images it enlarges for good detail.

My set up is an Eldebrock, principles are the same but brackets are different.

Don't mess this up you can ruin an AOD in instant. Don't ask me how I know this.

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Hey guy's after surfing the net all day I finally found what I think I was looking for, I'll let you know how it comes out when all the parts are received.

Thanks.

Thanks Pete for the site, Although different from what I'm looking for it provides options.

Hey Bird55, I'm 57Y a newcomer to the site, I viewed your post from Jan 2010 showing the Lokar set up to the Holley carb. I have one question, in pic #4 the Lokar return springs are connected on the forward end by the small "tear drop" to the throttle which has a factory bend where the tear drop piece is to go. Did you have to bend that "tear drop" piece?



Thanks.

Try a google search    - carb linkage ford with aod  - I got pictures at   http://www.shockley.net/Holley-AOD.asp  Pete

Does anybody there have any pics of the Lokar Ford AOD TV / Kickdown cable set up to a 4150 series Holley Carb. Mine is the Street Avenger. Help?