|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 103,
Visits: 251
|
Here is a pic. It is off my 1955 Mercury with a 292 and a mercomatic. It is where the linkage connects to the trans to make it shift. Any help would be awesome. Thanks, Kev  heres another 
Loving my Y!
Kevin Walshe
Costa Mesa, California
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 103,
Visits: 251
|
Sorry for the bad pictures guys. 
Loving my Y!
Kevin Walshe
Costa Mesa, California
|
|
Group: Forum Members
Last Active: Last Month
Posts: 3.7K,
Visits: 32.6K
|
Hard to make out which part you are looking for from pic.Is it a bushing that the shift rod sits in at the arm off the transmission or up top where the rod goes into the shifter arm on the steering column?
 
|
|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 103,
Visits: 251
|
It's a bushing that the shift rod sits in at the arm off the transmission. It looks as if the shift rod has a step in it where the bushing would have slid onto it and bottomed out holding it in place, while going through the arm, held on with a cotter pin. I hope I can find it. I will take a better picture today.
Loving my Y!
Kevin Walshe
Costa Mesa, California
|
|
Group: Forum Members
Last Active: 11 days ago
Posts: 1.2K,
Visits: 20.6K
|
Kevin If you can send me a better picture of the part you need to my e mail address,i might have it Carl Ohio
|