Profile Picture

Help with machining and decking info.

Posted By ZOEGA 15 Years Ago
You don't have permission to rate!

Help with machining and decking info.

Author
Message
ZOEGA
Posted 15 Years Ago
View Quick Profile
Hitting on all eight cylinders

Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)Hitting on all eight cylinders (18 reputation)

Group: Forum Members
Last Active: 15 Years Ago
Posts: 18, Visits: 90
I'm doing some work on my 292, here's what's in my plans:

-Taking 2,2 milimiters (0,086'') from the block.

-Takin 1,5 milimiters (0,059'') from the heads.

-Gasket thickness: 1,3mm (0,051'')

-Cam with 7,8 milimiters (0,307) lift.

-Stock flat pistons.

-Stock/Standart head valves.

-Cilinderheads volume: 72cc (before the machining)

-Standart rocker arms.

I'm worry about the piston hitting the head valves, am I right?

What's the estimated compression ratio?

Thanks!


F100 1979 ~ Y-Block 292


Threaded View



Reading This Topic

Site Meter