I need to repalce the OEM fuel line and buying a pre-bent fuel line is pricey and the line seems pretty simple except for the fitting going to the tank.  I'm looking at some of the tubing from Summit Racing or Russel, but my head is starting to spin when it comes to keeping track of the different flare angles (russel tube says 37 degree flare) and the converting between NPT fitting and -AN fittings.  I can figure out if I know what I'm starting with and the fitting that seems to matter is the one going into the fuel tank.  From there I can figure what adapers etc I need to get going and mate up with the new line.  Of course after all the adapters and flaring tools probably would be close to the price of a pre-bent line from in-line tube.

What is the stock fuel line diameter?...it seemed to be 1/4 inch but I was meauring with a tape measure...not the most accurate.