|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 4,
Visits: 12
|
|
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 710,
Visits: 78.1K
|
Sparky Please follow the link below http://forums.y-blocksforever.com/Topic31665.aspx? It tells the whole story about my recreation of the blower cams.Also has pricing and contact information on how to obtain one. Best regards,Oldmics
|
|
Group: Moderators
Last Active: 1 hour ago
Posts: 3.7K,
Visits: 322.9K
|
Oldmics: Sorry, I completely forgot you have blower cams. Oldtimers disease?
John - "The Hoosier Hurricane"
|
|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 4,
Visits: 12
|
would you be willing to sell one of these cams and how much thanks sparky
Sparky
|
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 710,
Visits: 78.1K
|
I have the blower cams new.I had Isky redo the original grinds from Ford specs and have a few left. Oldmics
|
|
Group: Moderators
Last Active: 1 hour ago
Posts: 3.7K,
Visits: 322.9K
|
Sparky: The standard cam was the standard cam for all '57 V8s. 18-58, 66-10, lobe lift .272 and .285, duration 256.. The optional cam was 32-78, 72-38, lobe lift .290 and .290, duration 290. Apparently some of the over the counter blower cams were re-boxed various other Y performance cams, all sold as B7A-6250-C. The cam I have in my Bird has B7A-C stamped in the rear journal, but it doesn't fit either of the above specs. As I remember it is 270 degree duration, and is an excellent street cam. All Y blocks in '57 had 1.54 rockers. John Mummert sells a blower grind cam, but I don't know if it is a true copy of the 290 Ford cam. Also Dennis K. has documentation of a 302 degree blower cam but none have been located.
John - "The Hoosier Hurricane"
|
|
Group: Forum Members
Last Active: 13 Years Ago
Posts: 4,
Visits: 12
|
i would like to know what the cam specs were for the 312 supercharged engine and what rocker ratio they used and does anyone make this cam or would it be custom grind. thanks sparky
Sparky
|