PST or Performance Suspension Technology

Posted By easyissy 14 Years Ago

You don't have permission to rate!

Author	Message
easyissy	Posted 14 Years Ago
Supercharged Group: Forum Members Last Active: 11 Years Ago Posts: 182, Visits: 767	I'm rebuilding my front end on my '58 Ford Custom 300 and was looking for vendors for suspension parts. The only companies that sell full kits are either Kanter or PST. I've read on here about Kanter but can't find any information on PST. Have any of you guys used there front end kits before? and what was your opinion on the quality? Thanks in advance for your help. 58 Ford Custom 300 - San Pedro, CA (So-Cal)
	Reply Quote

Threaded View

PST or Performance Suspension Technology By easyissy ( 14 Years Ago )

I went thru the same process in preparing to rebuild the front... By Jeff ( 14 Years Ago )

I have used PST parts on a 67 GTO front suspension and 66 F100 rear... By 58rancho ( 14 Years Ago )

Thanks for the reply's. Regarding NOS parts. Would'nt old rubber... By easyissy ( 14 Years Ago )

i've used PST on my ranchero and mustang, havent had any probs.
... By davis ( 14 Years Ago )

Thanks guys for the input. So PST it is. By easyissy ( 14 Years Ago )

I'd go to rockauto.com first. They listed ball joints, tie rod end,... By drof75 ( 14 Years Ago )

I would stick with the PST kit over buying piecemeal. You know you... By 58rancho ( 14 Years Ago )

Here's an update. I received my front end kit from PST but I was a... By easyissy ( 14 Years Ago )

The funny thing is, only the tie-rod ends were labeled as made in... By easyissy ( 14 Years Ago )

[quote][b]aussiebill (7/11/2011)[/b][hr][quote][b]easyissy... By aussiebill ( 14 Years Ago )

Bill, did you notice any visible differences in those ball joints, or... By pegleg ( 14 Years Ago )