Profile Picture

Turn Signal - Flasher Repair

Posted By Metal Ghost 14 Years Ago
You don't have permission to rate!
Author
Message
Metal Ghost
Posted 14 Years Ago
View Quick Profile
Normally aspirated

Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)Normally aspirated (46 reputation)

Group: Forum Members
Last Active: 13 Years Ago
Posts: 46, Visits: 183
Hi guys....last night my turn signals gave out on my '55 Fairlane.  By that I mean that they do not come on at all.

So with that I believe the culprit can be narrowed down to to the fuse, the flasher or the switch.  Now, are all three of these pieces up underneath the dash?  Silly question I'm sure, but I'll tell you that I had a heck of a time getting up there to see anything last night w00t .  Should I be able to reach up and grab the wiring, and then all three pieces will come down for servicing, or do I need to work upside down with a clutch pedal in my head Hehe .

Now, as far as parts, I don't know what fuse I need.  For the flasher I believe it's part#13350 (or NAPA NF535) and switch 13341, is that correct?

Thanks in advance for any help or insight you guys can provide!!! -Jeff


Threaded View

Threaded View
Forum Post Turn Signal - Flasher Repair By Metal Ghost ( 14 Years Ago )
Forum Post The flasher and fuse are under the dash. The switch is under the... By Richard Head ( 14 Years Ago )
Forum Post On my 58 the fuse is on the back of the headlight switch and the... By 58rancho ( 14 Years Ago )
Forum Post On '55 and '56 car the fuse is inline in a thin metal tube and very... By rick55 ( 14 Years Ago )
Forum Post 1st off, thanks so much for the help so far!! OK, an update: I'd... By Metal Ghost ( 14 Years Ago )
Forum Post It sounds like your flasher is finished.The 3 terminal flasher is... By oldcarmark ( 14 Years Ago )
Forum Post Sound to me like you my have gotten the incorrect flasher. Wiring... By Richard Head ( 14 Years Ago )
Forum Post im pretty sure you have the wrong one you need the two prong 6v... By 54mainlinetim ( 14 Years Ago )
Forum Post After looking a liitle further I am a little confused.On Ebay there... By oldcarmark ( 14 Years Ago )
Forum Post First of all, thanks everyone for there help! Tim - you even took the... By Metal Ghost ( 14 Years Ago )
Forum Post im sorry but on the hamb and in the above post i tell you what ones go... By 54mainlinetim ( 14 Years Ago )
Forum Post here ill repost it:
X=6VDC feed from fuse ( power wire to old...
By 54mainlinetim ( 14 Years Ago )
Forum Post Glad I could help.54Mainlinetim has the answer if you used the 3 prong... By oldcarmark ( 14 Years Ago )
Forum Post Thanks again everyone. '54 - sorry for the confusion, no, I did not... By Metal Ghost ( 14 Years Ago )
Forum Post no problems here! i was just wondering if you couldnt see the posts... By 54mainlinetim ( 14 Years Ago )


Reading This Topic


Site Meter