cannot start

Posted By 64 Tim 14 Years Ago

You don't have permission to rate!

Author	Message
64 Tim	Posted 14 Years Ago
Normally aspirated Group: Forum Members Last Active: 14 Years Ago Posts: 25, Visits: 36	Just put my y block together. It fired right up last night. Today it will not start. I am getting gas and spark. thoughts?
	Reply Quote

Threaded View

cannot start By 64 Tim ( 14 Years Ago )

Recheck the basics. Remove # 1 plug,make sure its on TDC .Make sure... By LON ( 14 Years Ago )

ok did all that, still nothing. check the coil, which check out.... By 64 Tim ( 14 Years Ago )

Was fresh gas, clean tank and new filter used when firing it up the... By 46yblock ( 14 Years Ago )

here is where I am at.............new condensor, points, coil and... By 64 Tim ( 14 Years Ago )

With flames coming out your exhaust , it sounds like your ignition... By rick55 ( 14 Years Ago )

retimed................motor fires up! thanks By 64 Tim ( 14 Years Ago )

Been there! Done that! Dont feel bad.Done the same thing! By oldcarmark ( 14 Years Ago )