When changing pistons and rods, is there any limit in weight that causes problems with balancing rotating assembly in Y-blocks. Thinking of getting much lighter pistons to get rotating mass as small as possible. With rod change it seems to be more difficult to save in weight, unless you buy some custom made aluminum rods. I have found couple of interesting rods from Callies to fit inside of Y with totally weird pistons .

Stock Y rod weighs about 680 grams and Callies rod with estimate hp rating up to 850 hp weights 648 grams.  And the piston I think, weights only about 419 to 432 grams. So, with that combination, I would end up to 1067 or 1080 grams. So, when stock Y piston weights 555 to 585 grams, I could save about 200 grams in every cylinder and that makes 1,6 kilos total. and there is some lighter piston pins too... 20 grams lighter atleast.

So, could this be problem at the balancing shop? Without using mallory metal of course...

 Seppo from Järvenpää, Finland
www.hollowheads.net (just click the hole in the head to proceed)