Need a torque plate to borrow/ rent

Posted By jepito 13 Years Ago

You don't have permission to rate!

Author	Message
jepito	Posted 13 Years Ago
Supercharged Group: Forum Members Last Active: 10 Years Ago Posts: 87, Visits: 541	My machine shop can't locate a torque plate for a 312. I'm near San Jose / Santa Cruz CA. If anyone has one to borrow/ rent or knows where we can find one I'd appreciate any info. Don't mind paying shipping if there are none near by. Thanks Jessup Jessupsshop@yahoo.com
	Reply Quote

Threaded View

Need a torque plate to borrow/ rent By jepito ( 13 Years Ago )

It's my understanding that John Mummert has one.

I'd... By NoShortcuts ( 13 Years Ago )

Hi, Paul.
The concept of torquing a deck plate in place before... By NoShortcuts ( 13 Years Ago )

[quote][b]PF Arcand (1/24/2012)[/b][hr]For a normal rebore that isn't... By Ted ( 13 Years Ago )

The deck plate is not a necessity on the Y as much as it is on the... By mctim64 ( 13 Years Ago )

Jepito,

SALUTE! Dotting the 'I's and crossing the 'T's is... By NoShortcuts ( 13 Years Ago )

Folks, I posted earlier this morning regarding 312 piston weights;... By bergmanj ( 13 Years Ago )

Hoosier, Thanks a lot for the reply! Can you, or anyone else,... By bergmanj ( 13 Years Ago )

As a general rule, always use a head gasket similar to the one... By Ted ( 13 Years Ago )

Hoosier, Ted, I now have a much better "grasp" of the requirements... By bergmanj ( 13 Years Ago )

My shop uses a head gasket and also preheats the block. By jepito ( 13 Years Ago )