• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• 351w crank possible?

351w crank possible?

Posted By jepito 13 Years Ago

You don't have permission to rate!

Post Reply

351w crank possible?

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
jepito	Posted 13 Years Ago
Supercharged Group: Forum Members Last Active: 10 Years Ago Posts: 87, Visits: 541	Can 351w crank journals be turned down to fit a 312? I'm sure some one has already thought about this bt couldn't find any threads on it.
	Reply Quote

Threaded View

Threaded View

351w crank possible? By jepito ( 13 Years Ago ) Anything is possible. That's about a 3/8" difference which is quite a... By charliemccraney ( 13 Years Ago ) A lot of years ago I bought a 1966 Shelby drag car that had been given... By Pete 55Tbird ( 13 Years Ago ) Speedway sells 3.85" stroke cranks for $400. Thought it might be worth... By jepito ( 13 Years Ago ) Ooohhh. I think that could work out better than the otherwise... By charliemccraney ( 13 Years Ago ) That's an even better deal. Rear main seal could be the main issue.... By jepito ( 13 Years Ago ) [quote][b]jepito (2/17/2012)[/b][hr]Rear main seal could be the main... By charliemccraney ( 13 Years Ago ) I have wondered about the feasibility of a 351W crank too. I have no... By gekko13 ( 13 Years Ago ) The thrust bearing on a Windsor is wider than a Y. The Cleveland is... By Hoosier Hurricane ( 13 Years Ago ) Any idea on 351 thrust width? Have a marine front cover to handle the... By jepito ( 13 Years Ago ) Y block width, 1.120, 351 W is 1.118, 351 C is 1.133. The problem... By Hoosier Hurricane ( 13 Years Ago ) Oops! Got the numbers reversed. The W is 1.133, the C is 1.118.... By Hoosier Hurricane ( 13 Years Ago ) using a 292 steel crank was once the way to stroke a 289. By 314 ( 13 Years Ago )

Post Reply

Back To Top

Reading This Topic