Well its running again. My build was 292 + 0.040" w/ egge pistons all balanced. Ecz-c heads with hard seats, posi valve seals, fresh cut seats and shaved 0.040. Mild regrind by Oregon Camshafts and redone lifters. Pistons avg 0.014" down with Best gaskets so around 0.060 squish so should be maybe 8.8:1ish. With Reds headers and 2 1/2" x-pipe to flowmaster copy mufflers with turndowns in front of axle. Sounds sweet maybe to much cab noise lol.



More pics and maybe video to come.



I am running Autolite 2100 and 57up distributor. So far jetting stock. Had to change accel pump setting to highest hole. And 17 degree initial 34 max mech adv and totlal 47 w/ vac. Has bit of stumble on tip in when taking off.



Any tips on set-up.



Thanks for everyone help along the way especially Tim, Ted and John