|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 426,
Visits: 1.4K
|
Y-Guys: I've tried calling Ted...he's on vacation...Does anyone know the ARP part number or the lengths needed? I know they're two lenghts needed but would the "stud" need more or less length. "Hoosier" Would you know? Thx, Bill Still fighting a gasket problem....
Bill Pelham,Al
|
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 1.8K,
Visits: 11.4K
|
yehaabill (8/13/2012)
Y-Guys: I've tried calling Ted...he's on vacation...Does anyone know the ARP part number or the lengths needed? I know they're two lenghts needed but would the "stud" need more or less length. "Hoosier" Would you know? Thx, Bill Still fighting a gasket problem.... Billy, on cast heads they seem to be 3" & 5" long. 
 AussieBill YYYY Forever Y Block YYYY Down Under, Australia
|
|
Group: Moderators
Last Active: 3 hours ago
Posts: 3.7K,
Visits: 323.1K
|
Bill: I use 1/2" studs, don't know the number for 7/16. However, I use studs for 351 Windsor. That tells me that the 302 studs should be the right length for 7/16 studs. The longer studs for the ends of the top row are just barely long enough, but they work.
John - "The Hoosier Hurricane"
|
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 426,
Visits: 1.4K
|
Message for "Hoosier": 1/2 studs are what I'm looking for....I'm already using 1/2 bolts....also I read the post on "Posting" a head by #3  cylinders....I'm using #471 heads now and they should be "posted"....Do I need to add more "posts"? Thx, Bill
Bill Pelham,Al
|
|
Group: Moderators
Last Active: 3 hours ago
Posts: 3.7K,
Visits: 323.1K
|
Bill: i bought my studs from Summit. Part number ARP- 154-4003. Your 471 heads already have some posts in them, but those you added can't do anything but help.
John - "The Hoosier Hurricane"
|