Checked the Mummert site and the Eickmans book, Eickmans has a small list of cams but I was working on a 57 truck motor and the cam has EDB on it and no B5A-6250- A,B, or C numbers, which isn't listed in his book. Is there a listing anywhere of cam specs for different cams used in Y's other than the Eickmans book? or does a EDB cam fall under one of the B bla bla bla 6250 numbers?

55 Vicky & customline

58 Rack Dump, 55 F350 yard truck, 57 F100

59 & 61 P 400's, 58 F100 custom cab, 69 F100, 79 F150, 82 F600 ramp truck, 90 mustang conv 7 up, 94 Mustang, Should I continue?

Billy, the EDB cam is correct for a 57 engine. It should have around 209 degrees @ .050" lift. All other Y-Block cams except the blower cam are 196 @ .050". Lobe lift is around .282" intake and .286" exhaust

I have more accurate numbers if you need them.

I know of no exact replacement for the EDB cam.

The stock replacement cams available through parts houses are of the smaller variety.

http://ford-y-block.com 

20 miles east of San Diego, 20 miles north of Mexico