Geting ready to fire my 312, primed the oil pump spun the oil pump shaft with a speed wrench. Got 70 psi at the gauge. I get a small amount of oil through the shafts. Shows at No. 2 pedestal on the right head and No. 3 pedestal on the left head. Dove roller rockers.



I do not have the pedestal spill over flow tubes hooked up or holes plugged.



I hooked up the starter motor and drove the engine w/o plugs for about 30 seconds. Same thing



I thought I would see a lot of oil from the rocker shafts by now.



Please advise



Thanks, Richard