|
Group: Forum Members
Last Active: 9 Years Ago
Posts: 1.4K,
Visits: 7.5K
|
Looks great! I checked out your post over on the HAMB, good tech and good looking engine. Let us see it in the car.
Glen Henderson
Freedom is not Free
Letohatchee, AL
|
|
Group: Forum Members
Last Active: 11 Years Ago
Posts: 68,
Visits: 355
|
I did build a alt. bracket using mostly the stock Y Ford gen. parts too,here a look at that for you other "Y" lovers. This was adding about 1in. to side bracket that bolts to head corner plus moved the back tab up for Alt. The bracket from the water pump to top of gen. was used by just adding longer bolts and some 1in. spacers,plus grinding some ark to under side. I added holes just to look good.
The stock lower slide adjustment can also be used ,but goes to back of alt. vs front of gen.
As a extra fact I'll show I'm using 5.0 SB Ford fanzy alum pulleys I was given from a Mustang buddy. The water pump 5.0 pulley work by using a 1/4in. spacer behind it,to line up with stock crank pulley.The Alt fanzy works anyway.
"The Bat" out of hell
50's & 60's hotrodder
retired speed shop owner,built and design hotrods, racecars
airbrush t-shirts, engine balancing
Miami fl.
|