• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• What is the max bore size for a 272

What is the max bore size for a 272

Posted By Rmc292 12 Years Ago

You don't have permission to rate!

Post Reply

What is the max bore size for a 272

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
Rmc292	Posted 12 Years Ago
Normally aspirated Group: Forum Members Last Active: 8 Years Ago Posts: 11, Visits: 45	I bought a 272 several years back that had been bored to 3.75 (292) and needs to be bored again. So can anyone tell me the max size that I can take it to or should I have it sleeved? thx
	Reply Quote

Threaded View

Threaded View

What is the max bore size for a 272 By Rmc292 ( 12 Years Ago ) You need to have it sonic tested, should go to 3.80 but just depends... By Glen Henderson ( 12 Years Ago ) Glen's advice is the best. The only way to be reasonable sure is to... By NoShortcuts ( 12 Years Ago ) Do you have a guess on what it would cost to sleeve all 8? By Rmc292 ( 12 Years Ago ) Rono on our Forum had engine machining work done at a machine shop in... By NoShortcuts ( 12 Years Ago ) .060 and never been apart! Are you sure you got the same block back? By ian57tbird ( 12 Years Ago ) Maybe the machine shop had a set of .060 pistons in stock they needed... By Hoosier Hurricane ( 12 Years Ago ) [quote][b]ian57tbird (9/4/2013)[/b][hr].060 and never been apart! Are... By NoShortcuts ( 12 Years Ago ) It's not as unusual as you might think. John Mummert had a 312 block... By Midwest Mike ( 12 Years Ago ) never saw one that wouldn't clean up at.060.i cant see how it could... By 314 ( 12 Years Ago )

Post Reply

Back To Top

Reading This Topic