Not a problem. I was just pointing out than when feasable or reasonable I prefer to support those in our hobby. Just a comment for consideration not concern. Chuck in NH

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

As far a John Mummert goes, he is an avid supporter of the Y-Block guys and the development of new products for our hobby. He is truly one of us. Based on that, I'm glad to allow him to make a bit on the products and buy from him! My $0.2. Chuck in NH

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Sure miss the old site as this topic had been discussed extensively.  Besides Bendtsens, there is Bristol Services Company and Hollywood Automotive that also offer adapters for putting an AOD behind the Y.  Both of these companies advertise in the Y-Block Magazine.

 

Bristol Services Company –Costa Mesa, CA – ph: 949-722-1122

Hollywood Automotive – St. Louis, MO – ph: 314-773-3333

Flat-O-Matic makes an adapter for the C4.

Lorena, Texas (South of Waco)

depends on what you want to do.  john mummert sells a c-4 to y-block adapter kits as well as a t-5 to y-block adapter kit.  the place you mentioned does to but i think there has been some problems with that kit.  others who have used it will chime in here.  ummmm....... if your looking to put a t-5 behind a y-block, theres a company called quicktime performance products that just came out with a bellhousing for the y-block that allows you to put a t-5, a tko 500 or 600, and a 3550  behind a y-block.  heres the links to the sites for john mummert and quicktime.

quicktime:  http://www.quicktimeinc.com/products.html#ford   have to scroll down a bit for the bellhousing

john mummert:  http://www.ford-y-block.com/   this is his home page.

hope this helps.

Y-guys    I can't seem to re-call the company that makes several trans

              adapters for Ford products. I think it's Bendsen's or????

              Help?                          Thx Bill

Bill

Pelham,Al