Group: Forum Members
Last Active: 10 Years Ago
Posts: 280,
Visits: 523
|
I have a tube coming from the side of my new gas tank but I can't figure out where the line is supposed to exit out of the trunk area. Does it go to the spare tire well which has a hole at the bottom where the tire lays? thanks
|
Group: Forum Members
Last Active: 11 Years Ago
Posts: 64,
Visits: 1.7K
|
You didn't say what car you have, but on my '55 Merc it exits at the left side of the filler neck behind the license plate. Should be a grommet there at about 10 o'clock.
|
Group: Forum Members
Last Active: 3 days ago
Posts: 1.2K,
Visits: 20.6K
|
Take a peek under the gas tank door,there is a solid line that runs from a rubber hose on the gas tank to under the gas tank door,it is on the drivers side Carl
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 280,
Visits: 523
|
It is on a 1955 customline and there is no hole in the rear panel around the filler neck probably have to drill one?
|
Group: Forum Members
Last Active: 4 Years Ago
Posts: 898,
Visits: 23.2K
|
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 280,
Visits: 523
|
I have that line that goes along the rear panel in the trunk just can't figure out where it is supposed to exit.
|
Group: Forum Members
Last Active: 5 Years Ago
Posts: 550,
Visits: 4.4K
|
As others have said, if you lower the fuel tank flap yo will see a grommet inside on the left side of the opening. All 55's vent at this location.
Rick - West Australia Do Y Blocks Downunder run upside down? Gravity Sucks!!
|
Group: Forum Members
Last Active: 10 Years Ago
Posts: 280,
Visits: 523
|
I know what the problem is then I replaced the rear trunk panel and there is no hole in it under the gas tank door for the line to come out.
|
Group: Forum Members
Last Active: 11 Years Ago
Posts: 64,
Visits: 1.7K
|
Easy fix. Drill a hole, stick a grommet in it and stick the end of the line into the grommet.
|