|
Group: Forum Members
Last Active: 2 Months Ago
Posts: 460,
Visits: 4.5K
|
I'm assembling a 292 which was a mis-match of parts (C2 block/ECG-C heads) and while sorting parts for re-assembly, came across two aluminium caps that appear to bolt on to the rocker shaft support stand.
I assume at the opposite end to the oil feed.
They are about 5/16" thick, with a machined slot underneath, from one bolt hole to the centre of the cap,
and they do not show in my 56 workshop manual.
* Where do they go?
* Are they needed or of benefit?
A mate dis-assembled the heads, but he is a merchant seaman and can't be contacted at the moment.
Thanks,
Al.
.
South Australia
|