fuel pump without vacuum assist

Posted By Dave V 11 Years Ago

You don't have permission to rate!

Author	Message
Dave V	Posted 11 Years Ago
Supercharged Group: Forum Members Last Active: Last Month Posts: 234, Visits: 41.4K	Is there a fuel pump available for a y-block without vacuum assist? If so, what year and model vehicle would I order it for? Dave V. SE Wis
	Reply Quote

Threaded View

fuel pump without vacuum assist By Dave V ( 11 Years Ago )

Chuck I'm using an FE fuel pump now and it puts out too much... By Dave V ( 11 Years Ago )

As far as having a filter after the pump, is it possible that the FE... By Dave V ( 11 Years Ago )

As far as contaminants from the tank, I do have an inline filter just... By Dave V ( 11 Years Ago )

[quote][b]Dave V (6/23/2014)[/b][hr]As far as having a filter after... By pegleg ( 11 Years Ago )

I had the 427 hipo pump on my Vicky for years and through way too... By MoonShadow ( 11 Years Ago )

This may be that bugaboo with the Holley - Viton needle and seat... By GREENBIRD56 ( 11 Years Ago )

Tried again to keep the Fe pump setup. I replaced the needles and... By Dave V ( 11 Years Ago )

Steve I have changed gauges to confirm the readings. Still shows 8... By Dave V ( 11 Years Ago )

Dave, Summit racing lists there own regulator, I have one on my F... By pegleg ( 11 Years Ago )

I removed the FE fuel pump and pressure regulator, installed my old... By Dave V ( 11 Years Ago )

That business with the flooding carb - especially with the "new... By GREENBIRD56 ( 11 Years Ago )

It's working for now at 4.5psi but I think the steel needles would be... By Dave V ( 11 Years Ago )

Are the steel needles recommended for street carbs too? Should I... By MoonShadow ( 11 Years Ago )

I have a 390 pump on mine. Works fine. By ejstith ( 11 Years Ago )

I should have mentioned that I run steel needles in my carbs also.... By pegleg ( 11 Years Ago )

I'm headed to the Iola Old Car Show and swap meet today which runs... By Dave V ( 11 Years Ago )