Hello,
I am new here, i live in Belgium and just bought a Ford F100 1955 with a 239 ci y block.
On the carb it says Ford CW.
I would like to change the carb because it is incomplete.
Could i use a Edelbrock? if i can, can anyone tell me what type i should buy, and do i need a new intake manifold?
 

You should be able to use one of the Edelbrock copies of a stromberg 94 or 97.It should fit your stock manifold.

Speedway Motors do a brand new repro

here  
 http://www.speedwaymotors.com/Speedys-9-Super-7-Primary-3-Bolt-2-Barrel-Carburetor-Plain-Finish,24691.html

or here  
http://tinyurl.com/mcdgvsw



South Australia

Here is a link for the Edelbrock 94 carbs.
http://www.edelbrock.com/automotive/mc/carburetors/94-series.shtml 

Lorena, Texas (South of Waco)

I would highly recommend the Edelbrock 94s.
They are a little more money, but very reliable.

Mike Rizzo

1963 F100 "Rudy"

Daniel Island, SC

If you are looking for originality, Carpenter does new original for $275

http://dennis-carpenter.com/carburetor-new-v8/p/8BA-9510-N/?green=BAB9CC03-CAF6-5348-0372-A4C193408B20



South Australia

This a picture of the carburator on my 1955 ford f100 pick up.

Maybe this will help😃

Holley 94 you can get parts to rebuild it at vintage speed. Or as Ted mentioned Edelbrock makes a reproduction. The center carb on my 3x2 is an edelbrock the outers are original (I had to get a replacement when I stripped a bolt) aside from the color the only major difference is it has modern Phillips head bolts rather than the original slotted.

Mike Rizzo

1963 F100 "Rudy"

Daniel Island, SC