Heads to fit the 256

Posted By Y-Block Y-not 11 Years Ago

You don't have permission to rate!

Author	Message
Y-Block Y-not	Posted 11 Years Ago
Hitting on all eight cylinders Group: Forum Members Last Active: 11 Years Ago Posts: 8, Visits: 29	Greetings - I have just sent the heads off my 256 out for rebuild - Blocks (short) all done and back together Unfortunately after cleaning the 25years of build up off them one is cracked beyond repair (coming out of a head bolt hole??) Casting mark on the head shows its a "EBZ-M" with 54E stamped - What heads can I interchange this with?? - Y's are hard to come by down under so any help is appreciated Gordon
	Reply Quote

Threaded View

Heads to fit the 256 By Y-Block Y-not ( 11 Years Ago )

Not having any experience with a 256 I dont have a pat answer.If I... By steinauge ( 11 Years Ago )

Check John Mummert's site for your info. By pegleg ( 11 Years Ago )

I had luck in finding a shop that specializes in industrial casting... By Dobie ( 11 Years Ago )

Water glass is sodium silicate, a common ingredient in most liquid... By Dobie ( 11 Years Ago )

if its a 55 truck head all later parts fit.the block is the same as... By 314 ( 11 Years Ago )

[quote][b]pintoplumber (12/4/2014)[/b][hr] Gordon, here's a... By NoShortcuts ( 11 Years Ago )

Dobie/Dennis; If you don't want to use the Sodium... By pegleg ( 11 Years Ago )

Thanks Pegleg. I've used it several times on different engines. The... By Dobie ( 11 Years Ago )