• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• cc's of 239 ebu head

cc's of 239 ebu head

Posted By pintoplumber 17 Years Ago

You don't have permission to rate!

Post Reply

cc's of 239 ebu head

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
pintoplumber	Posted 17 Years Ago
Supercharged Group: Forum Members Last Active: Yesterday Posts: 1.0K, Visits: 164.0K	Anybody know the cc's of a 239 ebu head? I'm getting restless.   Dennis in Lititz PA
	Reply Quote

Threaded View

Threaded View

cc's of 239 ebu head By pintoplumber ( 17 Years Ago ) Dennis: Did you try linking to J. Mummerts Head specs sheet? It might... By PF Arcand ( 17 Years Ago ) I'd like to put bigger heads on, but I don't know how much compression... By pintoplumber ( 17 Years Ago ) Dennis: I don't have any hands on experience with 239s, (they weren't... By PF Arcand ( 17 Years Ago ) Mine's a Dearborn EBU. I'm hoping we can get around the leaking... By pintoplumber ( 17 Years Ago ) Dennis. Is there a suffix on that casting number?. Also, does... By Ted ( 17 Years Ago ) Ted, I pulled the rocker covers. Here's the numbers inside EBU 6090 A1... By pintoplumber ( 17 Years Ago ) Dennis: I made some rough calculations that have some variables in... By Hoosier Hurricane ( 17 Years Ago ) John, I was concerned with water leaks with bigger heads. I have a 54... By pintoplumber ( 17 Years Ago ) John, How much does he gain cutting his C heads .060? I thought... By pegleg ( 17 Years Ago ) Frank: I think Ford claimed they made the C heads 10:1 on a 312 when... By Hoosier Hurricane ( 17 Years Ago ) I went to my machinist today and showed him this topic printout.Now he... By pintoplumber ( 17 Years Ago ) Dennis: You probably want to discuss air flow with him. The G heads... By Hoosier Hurricane ( 17 Years Ago ) Dennis. I looked through my collection of heads and didn’t find... By Ted ( 17 Years Ago ) I took the G heads to the machinist today.[1st one I worked on to get... By pintoplumber ( 17 Years Ago ) Update: I took the C heads to the machinist early this week. C heads... By pintoplumber ( 17 Years Ago )

Post Reply

Back To Top

Reading This Topic