Just a note for anyone that might have Y-blk automatic bell housings around that are not needed. Bristol Services in Costa Mesa CA is advertising for them & Flex plates also. contact; garycroan@gmail.com or 949-722-1122... Not sure why he hasn't advertised here? Was advised of the site some time ago..      


Paul

C1 AP 7976 A-1  & C1AP 7976 A-2 are aluminum y block bellhousings that ford o matic,cruise o matic and FMX will bolt up to.  Carl

Do a search  for  Transmission  Supply C4-C5 Bell application and you will find this  bell listed under 292 and also for 272!
It was  available at one time  there is no way of being sure  of finding one  now!

Hi, has anybody else seen a factory bell housing to put a c4 behind a Y block?

No problem, everything I've got is getting old.

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Thanks for the clairification. My eyes are getting old.
Very nice car
Jim

I thought it might be that picture. It is a reflection.



Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Ha Ha Ha
It appears to me that in the pic in the avatar that there is a hood scoop installed? Maybe it's just the lighting and again I am confused.
I apologize. I am talking about the car pictured (not avatar) next to the engine picture that appears 


Jim

No problem, are you talking about the engine, under hood picture or the car profile. Chuck

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

Thanks Small Block
Also, Moon I was talking about the hood scoop in the avatar.
This could go on forever
Regards
Jim