• Home
• »
• Keeping The Dream Alive!
• »
• Technical
• »
• Power valve

Power valve

Posted By 55Birdman 17 Years Ago

You don't have permission to rate!

Post Reply

Power valve

View

• Flat Ascending
• Flat Descending
• Threaded

Options

• Subscribe to topic
• Print This Topic
• Goto Topics Forum

Author	Message
55Birdman	Posted 17 Years Ago
Supercharged Group: Forum Members Last Active: 12 Years Ago Posts: 1.0K, Visits: 4.5K	What size do you recommend to install in Holley 94 3x2 set up. Vintage Speed says 2.5. I am not sure . Thanks 55Birdman  Hickory NC
	Reply Quote

Threaded View

Threaded View

Power valve By 55Birdman ( 17 Years Ago ) ADD ON > Speedway motors said to add a PVCR power valve restrictor... By 55Birdman ( 17 Years Ago ) What kind of cam are you running? Usually, the more aggressive the... By paul2748 ( 17 Years Ago ) I have stock 292. with 3x2s. carb leaks down and I was told to look at... By 55Birdman ( 17 Years Ago ) It sounds like they are saying to restrict the path of fuel to the... By charliemccraney ( 17 Years Ago ) Guys, It's what Charlie is trying to tell you. The number on the power... By pegleg ( 17 Years Ago ) So, pegleg would it be better to install plugs in the outer 2 and... By 55Birdman ( 17 Years Ago ) Put plugs in the outer two, cut gaskets to block the idle circuits in... By pintoplumber ( 17 Years Ago ) Sam & Bird. Theoretically (careful now) it would be better... By pegleg ( 17 Years Ago ) I have the outer carbs idle circuits closed but I still have the power... By 55Birdman ( 17 Years Ago ) Proving once again, there may be life on another planet! Or, maybe... By pegleg ( 17 Years Ago ) There's something out there. Life????? By 55Birdman ( 17 Years Ago ) [quote][b]55Birdman (5/29/2008)[/b][hr]There's something out there.... By paul2748 ( 17 Years Ago ) Cheap Gas! You holding out on us ? Where is it at? $3.90 in NC By 55Birdman ( 17 Years Ago ) Sam, There's really no correlation between the mechanical... By pegleg ( 17 Years Ago ) The correct method for increasing jet size when doing away with... By Ted ( 17 Years Ago ) Regarding jet size, I had tried .57 jets in all 3 carbs at a test and... By pintoplumber ( 17 Years Ago ) Now that's interesting. I'd have done just the opposite. Leaner on the... By pegleg ( 17 Years Ago ) Must be magic !! I thought the same as you:hehe: By 55Birdman ( 17 Years Ago ) My thinking was, if I dump 2 more carbs on a 239 I'll give it too much... By pintoplumber ( 17 Years Ago ) Dennis, I would have thought that the center carb would have... By pegleg ( 17 Years Ago ) Frank, I won't do anything with it for now. The carbs are so close... By pintoplumber ( 17 Years Ago ) Dennis: Way back when I had 3-2s, I had a right angle screw driver... By Hoosier Hurricane ( 17 Years Ago ) Dennis, I wouldn't either right now. I remember the jet... By pegleg ( 17 Years Ago ) John, no the heads are still at the machinist. He said we have time... By pintoplumber ( 17 Years Ago ) Dennis: I didn't think about it, but after reading your comment I... By Hoosier Hurricane ( 17 Years Ago ) Dennis, I replaced the "hidden screw" on my 3 carbs with a hex head... By popbreed ( 17 Years Ago )

Post Reply

Back To Top

Reading This Topic