the students in my auto shop class are rebuilding '55-7 ECG 272 as a class project, we are lookin for:

rear main bearing cap

pushrods

lifters

pistons (can we bore it to 292 specs?)

and any other of the common rebuild parts you may beiling to part with...

Thanks!

gotta know where you're located.

       A  L  A  N   F  R  A  K  E  S   ~  Tulsa, OK    

Where are you located? Chuck in NH

Y's guys rule!
Looking for McCullouch VS57 brackets and parts. Also looking for 28 Chrysler series 72 parts. And early Hemi parts.

MoonShadow, 292 w/McCulloch, 28 Chrysler Roadster, 354 Hemi)
Manchester, New Hampshire

sorry, located in Miles City MT

dont need the lifters-

anything else?

Didn't read this post until after I had replied to your intro post. Yes, you can bore the 272 to 292. I think I have a set of std bore 292 pistons that could be reused. New stock type pistons are still available through Auto Zone and maybe NAPA. There again depends on the budget. I'll dig through the ones that I have and if they look OK you can have them for shipping cost. You may get offers that are closer to you that will save shipping, just let me know.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Glen-

I'll definately take you up on that offer, thank you!

Send me your ship to address. I'll put together a goodie box this weekend and get it on the way first of next week.

Glen Henderson



Freedom is not Free

Letohatchee, AL

Hey, Glenn.  Let me know if you are not sending a set of pushrods.  I have a couple of sets and believe at least one set is of the tubular type.

TC

You gotta have the right tools and know how to use 'em.

TC - Austin, Texas

Hi Tom, I have pushrods, seal retainer, pistons, cam and lifters, truck timing chain and gears. Still not clear if he needs a rear main cap or not but I will throw one in. Ted tells me that the heads worked out real well for you and seem to have solved your problem.

Glen Henderson



Freedom is not Free

Letohatchee, AL