and once I get it in, the driveshaft won't go in. It seems too

          tight, and i've tried 2 different brands. I'm using a tool made for

          this, but it seems the bushing is too small.

                 I removed it and looked into the housing, and there is a

          groove, and maybe the "split" in the bushing is suppose to line

          up with the groove??? (I tried to lightly tap the driveshaft in,

          but it gets tight quick!     Suggestions welcome,

                                          Bill

                 Oh, by the way, its 68 degrees outside where I'm working....

          Just thought I'd throw that out there, if anyone wants to come help!!!!

Bill

Pelham,Al