Valve Spring Pressure

Posted By Hawk5619 16 Years Ago

You don't have permission to rate!

Author	Message
Hawk5619	Posted 16 Years Ago
Hitting on all eight cylinders Group: Forum Members Last Active: 3 Years Ago Posts: 20, Visits: 61	I am building a 292+.030 for a street driven nostagic Hot Rod or 59 Edsel. I have a set of G heads and new Schuman valves. The springs I am going to have my machine shop use are Schneider #68030. These are a single spring with a press. of 110lbs seat and 320lbs open. The cam is a Isky 301444 Is to much spring pressure for the Isky cam OR just about right. Thanks for all info Rick
	Reply Quote

Threaded View

Valve Spring Pressure By Hawk5619 ( 16 Years Ago )

Does that cam have a more common designation? ( Like E-2 or ?) And... By PF Arcand ( 16 Years Ago )

Seat pressure sounds good but if that 320# is the over the nose... By Ted ( 16 Years Ago )

After more checking with Schneider that 320lb open spec is at .600... By Hawk5619 ( 16 Years Ago )

I would check the Isky specs for that cam. They are well engineered... By jakdad ( 16 Years Ago )

[quote][b]46yblock (1/19/2009)[/b][hr]It has always been a curiosity... By Ted ( 16 Years Ago )

[quote][b]Ted (1/20/2009)[/b][hr][quote][b]46yblock... By 62galxe ( 16 Years Ago )

[quote][b]62galxe (9/15/2009)[/b][hr].....Ted was this using the inner... By Ted ( 16 Years Ago )

Paul, What I listed did not come from a book, We have a box of... By mctim64 ( 16 Years Ago )

Tim: I just checked J. Mummerts Spring listings & std. stock valve... By PF Arcand ( 16 Years Ago )

talk about a blond moment. forgot all about the step in the retainer. By 62galxe ( 16 Years Ago )

Thanks for the info. Sounds like just the outer should be ok. on the... By 62galxe ( 16 Years Ago )