Profile Picture

BEST CAM & HEADS FOR STREET 292

Posted By langy 19 Years Ago
You don't have permission to rate!

BEST CAM & HEADS FOR STREET 292

Author
Message
langy
Posted 19 Years Ago
View Quick Profile
Normally aspirated

Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)Normally aspirated (49 reputation)

Group: Forum Members
Last Active: 11 Years Ago
Posts: 40, Visits: 131
Hi need some advice for choosing a good Cam & Heads for my 292 (from a 55 F100), I'm using it for the strreet so don't need anything too wild, the engine i have came from a friends F100 and was running like a watch. Havn't pulled the engine apart yet but wanted to scource parts first. the car will have a C4 auto in it.

Opinions ???

 

Cheers

Steve.

http://www.langysrodshop.co.uk/Its good to be different but different ain't always good.


Threaded View

Threaded View
Forum Post BEST CAM & HEADS FOR STREET 292 By langy ( 19 Years Ago )
Forum Post A cam rated at 224 @ .050 with a rated duration of 270 with a 110... By speedpro56 ( 19 Years Ago )
Forum Post That's pretty much along the lines i was thinking Gary, Could you... By langy ( 19 Years Ago )
Forum Post Hi; Can you give some more info about your ride. Car, truck heavy or... By Pete 55Tbird ( 19 Years Ago )
Forum Post I know posted heads are supposed to be best, but Mummert says he often... By DANIEL TINDER ( 19 Years Ago )
Forum Post Langy: Before you buy a lot of parts, first determine what engine you... By Hoosier Hurricane ( 19 Years Ago )
Forum Post Thanks for that John, Will check numbers and let you know. It came... By langy ( 19 Years Ago )
Forum Post John checked engine number today and your right its a 239, Number is... By langy ( 19 Years Ago )
Forum Post Steve: EBU was '54 passenger car, EBV '55 truck. If you have an EBU,... By Hoosier Hurricane ( 19 Years Ago )
Forum Post John i'm in the Uk so Y blocks are not very readily available, I could... By langy ( 19 Years Ago )
Forum Post Steve: A 239 may power your light street rod very acceptably, unless... By Hoosier Hurricane ( 19 Years Ago )
Forum Post If you really do have a 292 and not a smaller engine, the non posted G... By RB ( 19 Years Ago )
Forum Post I agree with John, I think you would be better off getting a 292 block... By speedpro56 ( 19 Years Ago )
Forum Post Gary;

Re: "G" head CR, calculations by Bruce at YBM... By DANIEL TINDER ( 19 Years Ago )
Forum Post John i have to get anything i need from the U.S., Nobody holds Y parts... By langy ( 19 Years Ago )
Forum Post I believe bruce (YBM) would be more accurate on the compression ratios... By speedpro56 ( 19 Years Ago )
Forum Post Just to keep you up to speed i had a bit of luck yesterday and found a... By langy ( 19 Years Ago )
Forum Post Steve,YOU did GREAT!!! if the engine's in good shape.I would pay that... By speedpro56 ( 19 Years Ago )
Forum Post good snag on the aluminum valve covers too! By bird55 ( 19 Years Ago )
Forum Post For sure, i've been looking for Thunderbird covers for a while but had... By langy ( 19 Years Ago )
Forum Post Steve; As John has said, & has been discussed in YBM., hopping up that... By PF Arcand ( 19 Years Ago )
Forum Post Thanks Paul but i've sold it now and got myself a nice 292. Cheers... By langy ( 19 Years Ago )


Reading This Topic

Site Meter